Skip to content
AnnamNode
← All articles

Compare · 5 Nov 2026 · 8 min read

n8n vs Zapier: Cost per 1,000 Finished Jobs (Real Numbers)

n8n vs Zapier compared on the number that matters: cost per 1,000 finished jobs. See how task based and execution based pricing diverge as workflows grow.

Short answer: Zapier bills per task, meaning each action your workflow performs. n8n bills per execution, meaning one full run with any number of steps. For short, low volume workflows the two can cost about the same. As workflows get longer or busier, n8n’s cost stays flat while Zapier’s grows with every step.

Most comparisons stop at monthly sticker prices, which tells you very little, because a $20 plan and a $20 plan can buy wildly different amounts of work. The useful number is the cost per 1,000 finished jobs at the workflow length you actually run.

Disclosure: AnnamNode builds on n8n. We have tried to use each vendor’s own published numbers and to say where Zapier wins. Prices were checked on 2026 to 11 to 05; confirm on n8n pricing and Zapier pricing before you decide.

Two billing models

n8n Zapier
Unit Workflow execution (one full run) Task (each action step that runs)
Steps in a workflow Not billed Each billable action counts
Looping over 10 rows in a 2 step workflow 1 execution About 10 tasks (per n8n’s comparison)
Entry paid plan $20 a month billed annually, 2.5K executions $19.99 a month, 750 tasks (as described by n8n)
Overage Capped on Cloud plans 1.25x the base task rate (as described by n8n)
Self hosting Yes (Community Edition) No, cloud only

Two caveats before the maths. Zapier says some built in tool steps are free and triggers generally don’t count as tasks, so your billable count can be lower than your total steps. And Zapier’s larger plans have lower per task prices than the entry plan, so the entry rate below is a ceiling and not an average.

The maths

Take the entry plans. Zapier charges $19.99 for 750 tasks, about $26.65 per 1,000 tasks. n8n Starter is $20 for 2,500 executions, which is $8.00 per 1,000 when you use the whole allowance, and Pro is $50 for 10,000, or $5.00 per 1,000. For Zapier, the cost of 1,000 jobs is billable steps multiplied by $26.65.

Billable steps per job Zapier (entry plan rate) n8n Starter (full use) n8n Pro (full use)
2 about $53 $8 $5
5 about $133 $8 $5
10 about $267 $8 $5
20 about $533 $8 $5

Read that table with care. It is an illustration, not a quote, since real Zapier tiers above the entry plan cost less per task. n8n’s figure also assumes you use the plan’s whole allowance: run only 1,000 jobs on Starter and you still pay $20, so your cost per 1,000 is $20. The exact dollars matter less than the shape. Zapier’s cost climbs in a straight line with steps. n8n’s doesn’t.

A concrete workflow

Take a typical lead workflow with eight steps: a form is submitted, the data is validated, the company is enriched, the lead is scored with AI, the CRM record is created or updated, sales is notified in Slack, a first touch email goes out, and a row is logged to a reporting sheet. On a task based tool that is about seven billable actions. At 1,000 leads a month you are looking at roughly 7,000 tasks, against 1,000 executions on n8n. Add a branch for “hot lead” and a retry step and the Zapier count climbs again, while the n8n count stays put.

Now add a daily enrichment batch over 200 records. On a task based tool each record can burn tasks. In n8n it is a loop inside one execution.

Network graphic with words productivity, connectivity and efficiency Image: Pixabay (free to use)

When Zapier is the better choice

Cost isn’t the only axis, and Zapier genuinely wins in places. For short, simple workflows at low volume, a two step Zap run a few hundred times a month barely moves the bill. Its integration catalogue is far wider, 8,000+ against n8n’s 1,000+, with n8n relying on HTTP, GraphQL and webhook nodes to reach anything with an API, so if your niche SaaS only has a Zapier app, that matters. Zapier is easier for non technical builders, while n8n rewards people comfortable with JSON, expressions and the occasional line of code. It is fully managed, whereas self hosting n8n is your responsibility, though n8n Cloud is managed too. And on compliance paperwork, Zapier publishes established certifications, where self hosted n8n leaves you to build your own posture.

When n8n is the better choice

n8n shines on long or branching workflows, since IF, Switch, Merge and loop nodes all live inside one execution, and on high volume, because cost follows runs and not steps. It gives you data control through self hosting, so payloads never have to leave your infrastructure, while Zapier is cloud only and hosts data on AWS servers in the United States (per n8n’s page). For code heavy logic, n8n’s Code node runs JavaScript and Python and supports external npm libraries on self hosted setups. n8n’s comparison lists Zapier code step limits such as a 30 second execution limit and a 256 MB memory cap, but verify current limits on Zapier’s help center. n8n also includes AI agent, MCP and evaluation features with human approval for tool calls on every plan, and unlimited users and workflows, where Zapier restricts users on lower tiers.

Dashboard with traffic and conversion charts on a tablet Image: Pixabay (free to use)

The differences you feel in month twelve

Area n8n Zapier
Error handling Error workflows, Stop and Error node, per node retries Autoreplay for temporary errors, custom branches
Version control Git on Business and Enterprise, JSON export everywhere Templates only, no workflow export
Support Community forum, email and SLA on Enterprise Help center, live chat on higher tiers
Scaling Queue mode for high volume loads Cloud native scaling
Ownership Self host or cloud, export your workflows Vendor platform only

The feature rows come from the n8n vs Zapier comparison and each vendor’s documentation. Both are vendor pages, so read them accordingly.

Run the numbers for your own workflows

Do this once, on a workflow you already have. Count the billable steps in your longest Zap, leaving out the trigger and any free built in steps. Count monthly runs from the last 30 days of history. Multiply steps by runs to get monthly tasks, then look up the Zapier tier that covers it and its price. For n8n, count executions as runs per month, and watch polling schedules, because a check every five minutes is about 8,600 to 8,900 executions a month. Add the n8n extras (hosting if you self host, plus build or migration cost) and compare year one and year two, not just month one.

If the answer is close, optimise for the team that will maintain it. If the gap is large, migration usually pays back quickly; model it with our automation ROI guide.

The hidden line item

Moving from Zapier to n8n is a rebuild, with no direct export. Budget for auditing your Zaps, rebuilding logic, reconnecting credentials, parallel testing and cutover. We cover the process in how to migrate from Zapier or Make to n8n and the cost of getting help in what an n8n automation agency costs.

FAQ

Is n8n cheaper than Zapier?

For multi step or high volume workflows, usually, because n8n charges per execution and Zapier per task. For short, low volume workflows the difference can be small.

What is the difference between a task and an execution?

A Zapier task is each action step that runs. An n8n execution is one run of the whole workflow, whatever its steps or items.

Does n8n have fewer integrations than Zapier?

In raw count, yes (1,000+ against 8,000+), but the HTTP Request, GraphQL and webhook nodes plus community nodes cover most APIs. Check that your own apps are reachable before you commit.

Is self hosted n8n really free?

The Community Edition has no license fee, but you pay for infrastructure and upkeep. See n8n pricing in 2026.

Can I use both?

Yes. Many teams keep simple, niche app Zaps and move the heavy workflows to n8n.

Is Make cheaper than both?

Make bills per operation and sits between the two on complexity. We cover it in n8n vs Make for operations teams.

Sources

More articles